In the high – stakes realm of oil production, where every operation is a fine balance between maximizing output and ensuring safety. The BOP Control Unit is an essential component. As a leading exporter specializing in a wide range of BOP products, including SLB Cameron BOP,BOP control unit, schlumberger etc. We are committing to delivering top – notch solutions to oil – rich nations around the world.
Understanding the RIGRS BOP Control Unit
RIGRS BOP control system is a special equipment which is used to control BOP, hydraulic choke and killines. And indispensable equipment for blowoutprevention during driling or rebuilding well in oil and natural gas industny. The BOP Control Systems are all strictly designedmanufacturing and inspected in accordance with China National Standard SY/T5053.2-2007 & APl Spec.16D.
Type selection, propelinstallation, connection and maintenance of control system must depend On OPERATION MANUAL.More than 60 types of BOP Control Systems. Whose controlled objects are from 2 to 15, are suitable for any dificult climateatmosphere or bad weather conditions in inland sand areas or plateau at home and abroad.
The system is equipping with two pump groups. Electric pump with diferent flow rate, and pneumatic or manual pump which ensurethe system to work normally in case of power failure. The design of accumulator unit meets the requirement of closing all accumulator bop control system stacksand opening hydraulic valve. lf any accumulator fals to work, the total liquid loss wil not exceed 25%.
RIGRS can offer theaccumulator with ASME or CE mark that complies with the requirements of API Spec.16D in request of customers’ specialrequirements. The pressure of annular preventer circuit in control system may be adjusting by pneumatic regulator. lt charactersreverse adjusting. In case of sudden faiure of air supply, the pressure can be reset to the preset value automatically. The contromanifold of the remote control panel is equipping with an orifice as an inlet of the pressure source.
For example, the spare nitrogensystem offered by RIGRS provides emergent auxiliary energy. lf the accumulator of the pump can not provide the control manifoldwith enough power fuid. The spare nitrogen system may be using to provide high pressure air to close the preventer. The sparenitrogen system may provide emergency air supply for the driller’s panel and the auxiliary remote panel.
The system can be equipping with an alarm device.
lt monitors the accumulator pressure, ar supply pressure and the liquid level inthe oil reservoir. When the above parameters exceed the alarm limits, the audible and visual signal will appear immediately.The auxiliary remote panel and wireless auxiliary remote panel can be equipping with to monitor the remote control panel. Theauxiliary control panel is connecting to the remote control panel with air hose bundle or cable. Therefore, the system can be operatedand monitored from both driller’s panel and auxilary remote panel. Wireless auxilany remote panel, which communicates with remotecontrol panel by wireless signal, also can be suppling, lt can improve the safety of driling.
RIGRS key points of koomey BOP control system selection
To control accumulator bop control system and safely as well as prevent uncontrollable blowout, oil & natural gas industry standards SY/T5053.2-2007 andAPl Spec. 16D should be followed when you choose and purchase asuitable product.
Factors to be considered should at least be:
- a) Relationship between liquid volume required for closing BOPstacks and liquid volume available from the control system;
- b) Relationship between liquid volume used to close one annularBOP, open the hydranlically operated choke valve(s), and capacityof pump system;
- c)Environmental adaptation;
- d) special requirements on off-shore drilling platform.
1.Options for Controlled objects and Useful LiquidVolume
Useful liquid volume from an accumulator group shall be 2 times
greater than the required volume of closing BOP stecks
2.Requirements for Control System
Liquid VolumeUsed to Close an Annular BOP and Open Choke Valve(s)With the accumulators isolated from service and with one pumpsystems or one power system out of service. The remaining pumpsystem(s) shall have the capacity to close one annular BOP and openchoke valve’s) within two minutes
3.Environmental Adaptation
ComentionalBOP control systemis only suit for ambient temperatureof-13℃-50℃.When ambient temperature goes beyond. A housemade of steel sheet and equipped with thermal insulation andtemperature control should be used.
a)A steel sheet house with thermal insulation and heating issuitable for ambient temperature above -40℃℃;
b)A steel sheet house with thermal insulation and cooling issuitable for ambient temperature below 60’℃;
c) Hose bundle for remote control is suit for-40℃-50℃.However. When ambient temperature goes below 0’℃, dry compressed air mustbe used otherwise the hose would fail to work because of blockeddue to moisture freezing.
4.Special Requirement on Control System for Off-ShoreDrilling Platform
According to oil & natural gas industry standard. Driller’s panel foroff-shore platfomm (without workover) shall be equipping with audibleand visual alams to indicate the conditions of:
a)Low accumulator pressure;
b) Low liguid level in oil reservoir:c) Low pressure of compressed air source;
d)In addition, moisture proof, corrosion resistance should beconsidered seriously, And back-up power source in use (electriccontrol series).
5.Koomey BOP Control System Maintenance
It is suggested that BOP control should be maintaining atfixed periods and entirely maintained within a two-year cycle.
BOP Pressure Control System Key Features and Benefits
Advanced Automation: Our BOP Control Units, including those with Cameron BOP technology, feature state – of – the – art automation. In emergency scenarios, like a sudden pressure spike, the unit can automatically trigger the BOP within milliseconds. This rapid response, characteristic of high – quality cameron bop control systems. Significantly reduces the risk of a blowout and potential damage to the well and adjacent infrastructure.
High – Precision Monitoring: These units offer highly accurate monitoring of well conditions. The sensors integrated into our koomey bop control systems can detect even the most minor changes in pressure, flow rate, and other critical parameters. This precision allows for early detection of anomalies, giving operators ample time to take corrective measures before issues escalate.
Robust Design: Built to endure the harsh conditions typical of oil – producing regions. Our BOP Control Units, be it for onshore or offshore applications, are constructed with durable materials. Whether facing the extreme heat of Middle East deserts or the corrosive salt – laden air of offshore drilling platforms. Our bop equipment, including bop accumulators, is engineering for consistent and reliable performance.
Remote Operation Capability: In the modern digital era, remote operation is a game – changer. Our BOP Control Units, including those compatible with Schlumberger Cameron setups. Can be operated and monitored from a control center located far from the actual well site. This not only enhances personnel safety but also enables more efficient management of multiple well sites from a single location. Which is a key aspect of effective well control systems.
API Koomey Unit BOP Accumulator Control Unit application in Oil – Producing Nations
Onshore Oil Fields: In countries such as Saudi Arabia, Iraq, and the United States, where extensive onshore oil fields are operational, Cameron BOP control systems play a pivotal role. For example, in Saudi Arabia’s large – scale oil fields, our advanced aftermarket bop control systems. With their automation and remote operation features, empower operators to manage numerous wells with ease, ensuring continuous and safe production. The use of reliable bop products, like those with Cameron BOP technology, is widespread in these regions.
Our BOP control systems are trusting by customers across major oil-producing regions:
South America: From Venezuela to Brazil, our Koomey and Cameron units perform reliably in jungle and offshore platforms alike.
Middle East: Our API-certified BOP panels operate in high-temperature, high-pressure drilling sites in Saudi Arabia, UAE, and Iraq.
Russia and CIS: Our units withstand extreme cold and meet Russian GOST standards for oilfield equipment.
Why Choose RIGRS Koomey Unit BOP Accumulator Control Unit?
Expertise and Experience: With years of experience in the industry, we have an in – depth understanding of the specific requirements of oil – producing nations. Our team of engineers and technicians specializes in designing and manufacturing a variety of BOP solutions, from standard NOV bop control systems to customized aftermarket bop control systems. We are well – versing in working with brands like Schlumberger Cameron and SLB Cameron, ensuring that our products meet the highest international standards.
Customization Options: We recognize that each oil – production operation is unique. That’s why we offer extensive customization for our BOP products. Whether it’s adapting to specific well conditions or integrating with existing well control systems, we can tailor our offerings, including bop detector systems and bop simulators, to meet your exact needs.
After – Sales Support: Our commitment to custom ers extends beyond the point of sale. We provide comprehensive after – sales support, covering maintenance services, ready availability of spare parts, and technical assistance. This ensures that your BOP Control Unit, along with other bop products, continues to operate at peak performance throughout its lifespan.
In conclusion, if you are an oil – producing nation aiming to enhance the safety and efficiency of your oil production operations. Discover our API Spec 16D-compliant NOV BOP control systems for reliable well control. Trusted Cameron and Koomey units safeguard drilling ope.
